Bike A Ton is reader-supported. When you buy via the links on our site, we may earn an affiliate commission at no cost to you. Feel free to click away.

what is a schrader valve

What is a Schrader Valve?

Do you know what a Schrader valve is? You might if you’re a cyclist, because they are commonly used on bike tires. But if you’re not into cycling, you might not have a clue. In this post, we’ll take a closer look at Schrader valves and see if they’re the right choice for you. Stay tuned!

What is a Schrader Valve?

A Schrader valve is a type of valve that is commonly used on bicycle tires. It is also sometimes referred to as American valve. In terms of size,  Schrader valves are shorter and wider than Presta valves, which are another type of valve that is often used on bicycle tires.

Schrader valves are made of metal and have a small pin in the center of its valve core. They allow air to flow into the tire when you pump it up, and they also allow air to escape when you press the pin.

Schrader valves are often used on mountain bikes, kid’s bikes, and some hybrid bikes. This is because they are considered stronger and more durable than Presta valves. They are also less likely to leak air, which is important when you’re riding on rough terrain.

Parts of a Schrader Valve

The main part of the Schrader valve is the metal body with its outer wall  grooved to fit a cap. This is what screws onto the tire.

The valve stem is the part that you hold onto when you’re screwing the valve on or off. The stem is also what you use to pump air into the tire. The valve also has a rubber gasket, which helps to create a tight seal. The gasket is what prevents air from escaping when the valve is closed.

The valve cap is a small piece of plastic or metal that fits over the top of the valve stem. The valve cap helps to keep dirt and debris out of the valve, which can cause problems.

The removable valve core is a small piece that sits inside the valve body. The pin on the valve core is what allows air to flow in and out of the tire. The valve core can be removed, which makes it easier to clean the valve or to add sealant.

When you want to add air to your tire, you remove the valve cap and attach the pump. When you want to release air from your tire, press the valve core and air will start to escape.

How does a Schrader valve work?

A spring-loaded check valve is what allows air to flow into the tire when you’re pumping it up. The check valve is opened by the pressure of the air as it enters the tire.

When you press on the valve core, it releases the pressure from the check valve and allows air to escape. The amount of air that escapes depends on how long you press the valve core.

How to Use a Schrader Valve

To use a Schrader valve to inflate your tire, you will need a pump with a Schrader valve attachment. The attachment is simply a metal or plastic piece that fits over the top of the valve. Here’s how to inflate your tire:

1. Remove the valve cap from the valve stem. Clean any dirt or debris from the valve stem.

2. Attach the pump onto the valve stem.

3. Pump air into the tire using the recommended PSI for your tires.

4. Remove the pump attachment and screw the valve cap back on.

To use a Schrader valve to release air from your tire, you will need to remove the valve core. Here’s how to deflate your tire:

1. Remove the valve cap from the valve stem.

2. Press the valve core using any type of small, sharp object (a paperclip or needle will work).

3. Hold the valve core down until the tire is at the desired PSI.

4. Screw the valve cap back on.

5. Replace the valve core if necessary.

What is the main difference between a Schrader valve and a Presta valve?

A Schrader valve is shorter and wider compared to a Presta valve. Both valves have a small hole in the center and are made of metal. The main difference between the two valves is the size of the hole. Schrader valves have a larger hole, which makes them easier to use.

Presta valves are often used on road bikes because they create a tighter seal, which prevents air from leaking out. Schrader valves are often used on mountain bikes and BMX bikes because they are easier to use.

Advantages of a Schrader Valve

  • Easy to use and more common
  • Core is replaceable
  • Cheaper than Presta Valve
  • More durable
  • Easier to inflate

Disadvantages of a Schrader Valve

  • Heavier
  • Not as airtight as some other valves
  • Requires a special tool for removing valve core
  • Debris can enter the valve and cause problems

How to Know if Your Valve is a Schrader Valve?

If you’re not sure what type of valve your tires have, it’s probably a Schrader valve. You can also check the size of the valve. Schrader valves are usually about 8mm in diameter, while Presta valves are about 6mm in diameter.

If you’re still not sure, take a look at the valve stem. If the valve stem is threaded, it’s a Schrader valve.

Summary

Schrader valves are the most common type of valve, so they’re often used on car tires, bicycle tires, and most other types of tires. They are stronger and more durable than Presta valves, and they’re easy to use so they’re used on mountain bikes and kid’s bikes.

If you’re not sure what type of valve your tires have, it’s probably a Schrader valve.


Related Posts


Scroll to Top